Technical Specifications - Perel Tools SSE030FP Manual Del Usuario

When the code is correct, the display backlight turns blue and the display will show 'OPEN'. Turn
•
and pull the rotary knob [A] to open the door within 7 seconds.
Personal code
Note: for security reasons it is strongly advised to reprogram the factory preset code immediately.
Press the -button on the keypad [C]. The display will show "- - - - - - - -".
•
Enter the factory preset code "1234". Confirm by pressing the
•
When the code is correct, the display will show 'OPEN'. Press the
•
The display will show "- - - - - - - -".
Enter your new personal code (4 ~ 8 digits) and press the
•
'INTO' to confirm that the personal code was set successfully.
Resetting the personal code
When the personal code is lost, open the door with the override key.
•
Locate the RESET button [G] at the inside of the door and push on it. The display shows 'CLEAR'
•
and the personal code is now reset to the factory default (1234). Date and time are memorized.
When Press the -button on the keypad [C]. The display will show "- - - - - - - -".
•
Enter the factory preset code "1234". Confirm by pressing the
•
Setting date and time
To set the date and time, press the
•
Use the 8-button to increase or the 0-button to decrease the value.
•
Press the -button to move to the next digit.
•
Notes:
time format is 24h
•
WEEK indicates day of the week, with 1 = Monday
•

4. Technical specifications

fire-resistance rating
volume
external dimensions (H x W x D)
internal dimensions (H x W x D)
weight
Use this device with original accessories only. Velleman nv cannot be held responsible in
the event of damage or injury resulted from (incorrect) use of this device. For more info
concerning this product, please visit our website www.perel.eu. The information in this
manual is subject to change without prior notice.
© COPYRIGHT NOTICE
The copyright to this manual is owned by Velleman nv. All worldwide rights reserved.
No part of this manual or may be copied, reproduced, translated or reduced to any electronic
medium or otherwise without the prior written consent of the copyright holder.
31/07/2009
-button. The first digit will start to flash.
1
net
gross
1
temperature inside remains ±100.7°C while safe is subjected to 1010°C for 1h
SSE030FP
-button to confirm. The display shows
1h
12L
300 x 420 x 360mm
180 x 300 x 225mm
28kg
31kg
Refer to the chart at page 2 of this manual.
4
-button.
-button within 7 seconds.
-button.
© Velleman nv