Nilo ALL-IN-ONE EASY Manual De Empleo página 45

Edition
ALL-IN-ONE EASY
001 12
/
EMERGENCY MAINTENANCE
If the cot should get stuck in any particular position, proceed as follows to release its internal parts.
1. Remove the 2 screws on the upper casing
underneath the plastic casing under the backrest;
you can get at them by gently pressing the plastic
edge.
3. Raise the tub and remove the 3 screws which
hold the upper casing in place
5. Remove the lower casing as described in the
ordinary maintenance instructions
Pict.11 Emergency maintenance
EMERGENCY MAINTENANCE
2. Unscrew the screws on the upper casing next
to the pushbutton panel base
1
4. Remove the mixer and pushbuttons from the
casings and remove the casings from the cot
3
5
43 EN
2
4