Default Configuration - Dell S6010-ON Manual Del Usuario

Accessing the RJ-45 Console Port with a
DB-9 Adapter
You can connect to the console using an RJ-45 to RJ-45 rollover cable and
an RJ-45 to DB-9 female DTE adapter to a terminal server (for example, a
PC).
The pin assignments between the console and a DTE terminal server are as
follows:
Table 1. Pin Assignments Between the Console and a DTE Terminal Server
S6010-ON RJ-45 to
Console Port RJ-45
Rollover
Cable
Signal RJ-45 Pinout RJ-45 Pinout DB-9 Pin
NC 1
NC 2
TxD 3
GND 4
GND 5
RxD 6
NC 7
NC 8

Default Configuration

When you install the Dell Networking OS onto your S6010–ON system, it is
not configured when you power up for the first time (except for the default
host name, which is Dell).
Configure the system using the CLI.
RJ-45 to RJ-45 to
RJ-45 DB-9 Adapter
Rollover
Cable
8 8
7 6
6 2
5 5
4 5
3 3
2 4
1 7
Terminal
Server Device
Signal
CTS
DSR
RxD
GND
GND
TxD
DTR
RTS
27