Ml Pipetting - 3M Pipettor II Manual De Instrucciones

6.8 1 mL Pipetting
1. Press repeatedly until the display reads:
2. Press to enter selection.
3. Attach the pipette tip to the tip cone.
The pipettor is now ready to aspirate 1.00 mL.
4. Place the tip in the sample and press the Start-button. The unit will aspirate the 1.00 mL.
The next display indicates that the unit is ready to dispense the total
volume (1 mL) with blow-out.
5. Position the pipette tip to dispense onto the 3M Petrifilm Plate and press the Start-button. The unit will dispense the full amount from the tip.
The display now indicates that the unit is ready to repeat the 1 mL
pipetting, beginning with the 1.00 mL aspiration.
6. Eject the disposable tip by pressing the tip ejector button twice, and repeat the series beginning with step 3.
P1
1 mL
P1
1.00 mL
5
SPEED
IN
P1
1.00 mL
5
SPEED
OUT
P1
1.00 mL
5
SPEED
IN
13
(English)