12. Privacy Zone Setting (PRIVACY ZONE)
Perform settings of up to eight privacy zones where you wish to veil the monitor screen.
1. Select "ON(1)", "ON(2)" or "OFF" for "PRIVACY ZONE" on page 2 of the "CAMERA SETUP" menu and press the [SET] button.
The default setting is "OFF".
ON (1): Veils the zone with grey.
ON (2): Veils the zone with mosaic.
OFF: Displays pictures normally.
→ The "ZONE NUMBER" selection menu opens.
2. Select a zone number on the top line using the [LEFT] and
[RIGHT] buttons and press the [SET] button. The zone number
followed by an asterisk * indicates that it has been already reg-
istered.
→ "POSITION", "SCALE", and a frame appear on the menu.
3. Select "→PUSH SW" for "POSITION" and press the [SET] but-
ton.
→ Position selection becomes available.
4. Move the picture portion to be veiled to the center of the frame
using the [LEFT], [RIGHT], [UP], or [DOWN] button.
5. Select "→PUSH SW" for "SCALE" and press the [SET] button.
→ Zone scale adjustment becomes available.
6. Adjust the zone scale using the [LEFT], [RIGHT], [UP], or [DOWN] button.
7. To apply the settings, move the cursor to "SET" and press the [SET] button.
→ The screen returns to the "ZONE NUMBER" selection menu.
To delete the settings, select "DEL" and press the [SET] button.
13. Electronic Zoom (EL-ZOOM)
1. Move the cursor to "EL-ZOOM".
2. Select "ON" or "OFF" by pressing [LEFT] and [RIGHT] buttons.
The default setting is "OFF".
ON: x2 electronic zoom is available with the ZOOM switch on
the controller.
OFF: The electronic zoom function is disabled.
3. While the cursor is on "EL-ZOOM", press the [SET] button. The
"EL-ZOOM" menu appears.
4. Move the cursor to "→PUSH SW" for "ZOOM" and press the
[SET] button to display the "ZOOM" setting menu.
5. Press the [UP] or [DOWN] button to zoom in or out the image.
6. Move the cursor to "→PUSH SW" for "PAN/TILT" and press the
[SET] button. The "PAN/TILT" setting menu appears.
7. Press [LEFT], [RIGHT], [UP], or [DOWN] button to change the
angular field of view.
8. To return to the "EL-ZOOM" menu, press the [SET] button.
30
**ZONE NUMBER 1 /8**
RET TOP END
**ZONE NUMBER 1 /8**
→PUSH SW
POSITION
→PUSH SW
SCALE
SET DEL
RET TOP END
**EL-ZOOM**
→PUSH SW
PAN/TILT
→PUSH SW
ZOOM
U TILT D/L PAN R
RET TOP END
**EL-ZOOM**
→PUSH SW
PAN/TILT
→PUSH SW
ZOOM
U ZOOM D
RET TOP END