G e t s t a r t e d
■ Switch the phone on and off
Warning: Do not switch the phone on when wireless phone use is
prohibited or when it may cause interference or danger.
Press and hold the power key. See "Keys and parts," p. 15.
If the phone asks for a PIN or a UPIN code, enter the code (displayed as ****),
and select OK.
Plug and play service
When you switch on your phone for the first time, and the phone is in the
standby mode, you are asked to get the configuration settings from your
service provider (network service). Confirm or decline the query.
See
Connect to service provider
settings service," p. 10.
■ Normal operating position
Use the phone only in its normal
operating position.
Your device has an external antenna.
Note: As with any other radio transmitting
device, do not touch the antenna unnecessarily
when the device is switched on. Contact with
the antenna affects call quality and may cause
the device to operate at a higher power level
than otherwise needed. Avoiding contact with the antenna area when operating
the device optimizes the antenna performance and the battery life.
■ Wrist strap
Remove the back cover and the battery.
Insert the strap as shown in the picture.
Replace the battery and the back cover.
14
support, p. 45, and "Configuration