Layout; Intended Use; Technical Data - EINHELL NEW GENERATION NLK 65 H Manual De Instrucciones

Anleitung_NLK_65_H_SPK7:_
Never open the equipment or touch live parts –
danger of fatal accident!
Never use the equipment in the vicinity of wash
basins, water connections, swimming pools or in
the bathroom!
Never immerse the equipment in water – danger
of fatal accident!
Do not place the equipment near wet rooms or
wet areas (bath, shower, swimming pool etc.). It
must not be possible for the control elements to
be touched by a person in a shower, a vessel
filled with liquid or the bathtub.
Do not position the equipment directly below a
socket.
If the equipment is used for a lengthy time the
housing can become very hot. Position the
equipment in such a way as to prevent accidental
touching.
Never position the equipment on deep pile
carpets.
Do not use the equipment in rooms in which
inflammable materials (for example solvents, etc.)
or gases are used or stored.
Keep highly inflammable substances and gases
away from the equipment.
Do not use in areas where there is a fire risk (for
example wooden sheds).
Only use the heater with its mains lead fully
extended.
Not suitable for installation on permanently
installed electrical cables.
Do not use the equipment for animal husbandry
or livestock breeding.
Keep children and people on medication or under
the influence of alcohol away from the equipment.
Important. Do not cover the equipment – fire risk!
Pay attention to the symbol on the equipment
(Fig. 7).
Tips on saving energy when cooling
Close all windows, doors and Venetian blinds in order
to reduce incoming sunlight as far as possible.
2. Layout (Fig. 1-2)
1 Indicator panel
2 Switch for cooling / heating
3 Trough handle
4 Castor
5 Water tank
6 Water level indicator
7 Vertical air outlet fin
8 Main switch
9 Air intake filter
10 Cable store
14.05.2009 13:15 Uhr Seite 13
Accessories (Fig. 3)
15 Remote control
16 Cooling elements (2 items)
Control panel layout (Fig. 4)
20 "ON/OFF" switch for switchin on and off
21 "Speed" switch for fan speed
22 "Mode" – switch for mode selection
23 IR – receiver for remote control
24 "OSC" – switch for moving the vertical air outlet
fins
25 "Cool" – switch for cooling mode
26 "Heater" – switch for heating mode
27 "Timer" – time switch (0.5 – 7.5 h)

3. Intended use

The equipment is designed for heating or cooling the
air in closed rooms.
The equipment may only be used for the tasks it is
designed to handle. Any other use is deemed to be a
case of misuse. The user / operator and not the
manufacturer will be liable for any damage or injuries
of any kind caused as a result of this.
Please note that our equipment has not been
designed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
equipment is used in commercial, trade or industrial
businesses or for equivalent purposes.

4. Technical data

Mains voltage:
Nominal power rating in cooling mode:
Nominal power rating in heating mode:
Water tank capacity:
Max. humidification output:
Fan speed levels:
Negative ions:
Dimensions (WxDxH):
Net weight:
GB
220 - 240 V ~ 50 Hz
65 W
2000 W
5 liters
0.3 l/h
3
6 3
≥ 3x10 n/cm
26 x 32 x 70 cm
6.47 kg
13