3
SAFETY INSTRUCTIONS
This safety symbol indicates important safety mes-
sages in this manual. When you see this symbol, be
alert to the possibility of injury, carefully read the
message that follows, and inform other operators.
3.1 OPERATING INSTRUCTIONS
•
Ensure that the instructions in this book are
read and fully understood.
•
No person should be allowed to operate this
machine unless they are fully acquainted with
all the controls and the safety procedures.
•
Never allow children or people unfamiliar with
these instructions to use this machine. Local
regulations may restrict the age of the
operator.
3.2 SAFETY SIGNS
•
It is essential all safety labels are kept legible,
if they are missing or illegible they must be
replaced. If any part of the machine is
replaced and it originally carried a safety label,
a new label must be affixed to the
replacement part. New safety labels are
obtainable from Ransomes dealers.
3.3 STARTING THE ENGINE
•
Before starting the engine check that the
brakes are applied, drives are in neutral,
guards are in position and intact, and
bystanders are clear of the machine.
•
Do not run the engine in a building without
adequate ventilation.
3.4 DRIVING THE MACHINE
•
Before moving the machine, check to ensure
that all parts are in good working order, paying
particular attention to brakes, tyres, steering
and the security of cutting blades.
•
Replace faulty silencers, mow only in daylight
or good artificial light
•
Always observe the Highway Code both on
and off the roads. Keep alert and aware at all
times. Watch out for traffic when crossing or
near roadways.
GB-6
SAFETY, OPERATORS & MAINTENANCE MANUAL
•
Stop the blades rotating before crossing
surfaces other than grass.
•
Remember that some people are deaf or blind
and that children and animals can be
unpredictable.
•
Keep travelling speeds low enough for an
emergency stop to be effective and safe at all
times, in any conditions.
•
Remove or avoid obstructions in the area to
be cut, thus reducing the possibility of injury to
yourself and/or bystanders.
•
When reversing, take special care to ensure
that the area behind is clear of obstructions
and/or bystanders. DO NOT carry
passengers.
•
Keep in mind that the operator or user is
responsible for accidents or hazards occurring
to other people or their property.
•
When the machine is to be parked, stored or
left unattended, lower the cutting means
unless the transport locks are being used.
•
While mowing, always wear substantial
footwear and long trousers. Do not operate
the equipment when barefoot or wearing open
sandals.
•
Check the grass catcher frequently for wear or
deterioration. After striking a foreign object
Inspect the lawnmower for damage and make
repairs before restarting and operating the
equipment.
•
If the machine starts to vibrate abnormally,
check immediately.
3.5 TRANSPORTING
•
Ensure that the cutting units are securely
fastened in the transport position. Do not
transport with cutting mechanism rotating.
•
Drive the machine with due consideration of
road and surface conditions, inclines and local
undulations.
3.6 LEAVING THE DRIVING POSITION
•
Park the machine on level ground.
•
Before leaving the driving position, stop the
engine and make sure all moving parts are
stationary. Apply brakes and disengage all
drives. Remove the starter key.