Malfunctions; Technical Information - Taski swingo 350B Manual De Instrucciones

Malfunctions

Malfunction
Machine without function
The battery indicator LED lights up
solid red when the machine is turned
on The battery indicator LED brief-
ly lights up green when the charger is
plugged in and thus shows that the
battery is already charged
Brush does not rotate
Poor suction performance Ground
remains wet Recovery water is not
absorbed
Insufficient cleaning solvent supply

Technical information

Machine
Working width
Suction nozzle / squeegee width
Dimensions (L x W x H)
Maximum weight of operational machine
Rated voltage
Rated power, nominal
Fresh water tank, nominal +/- 5%
76
Possible causes
Machine is switched off
Batteries discharged or battery char-
ger defective
Batteries defective
Battery voltage is between loading
and residual threshold
Brush drive switched off
Machine overload, overload switch
was activated
Suction not switched on
Suction hose not connected
Blades worn out
Suction hose or squeegee clogged
(e.g. pieces of wood, pieces of fab-
ric)
Suction filter clogged
Fresh water tank empty
Quantity of the cleaning solution is
set too low
Cleaning solution button switched off • Press cleaning solution button
Fresh water tank filter
Troubleshooting
• Turn the machine on (main switch)
• Load batteries
• Contact your service partner
• Contact your service partner
• Press the main switch button for 7
seconds to turn the machine back
on again
• Load batteries
• Press Brush button
• Release the switch drive and press
again
• Poss. turn the machine off and
back on again (main switch)
• Press suction unit button
• Connect suction hose
• Replace blades
• Remove any foreign matter
• Remove any foreign matter
• Check fresh water tank
• Adjust cleaning solution volume
with +/- buttons
• Filter
38
55
79x45x43
67
24V
1100
10
Page
66
68
66
66
75
66
71
66
66
cm
cm
Cm
kg
DC
W
l