Control Panel/Operation
Dishwasher
%
E3
Start
Dishwasher
Start
Interrupt
or Pause
Cancel
Open door to select the desired options. Press the STARTbutton and close the
door within lO seconds to start the cycle or begin the Delay Hours countdown.
The wash cycle will begin shortly after closing the door. The display will turn off if
the door remains open for two minutes. To activate the display, close and open the
door or press any button.
To interrupt or pause a dish cycle, slowly open the door. Opening the door will
cause the wash cycle to pause. The dishwasher will beep every minute to remind
you to close the door. To restart or resume the cycle, press START,and close the
door within lO seconds.
To cancel a wash cycle, press and hold the STARTbutton for 3 seconds and close
door. The dishwasher will drain, emit a beep sound, and the wash cycle light will
turn OFF.
Cycle Indicator
Lights and Sounds
Cycle Sanitized
Displayed at end of the cycle when Sanitize Temp has been selected and the
dishwasher has met requirements for sanitization. See Sanitize Temp, for complete
description.
Cycle Complete
Displayedwhen a wash cycle is complete.
Low Rinse Aid
Displayedwhen rinseagent is low or empty. Seepage Z0for Use a RinseAgent. Toturn
indicator off, pressthe Pre-Soakbutton 7 times within 5 seconds.Repeatthis processto
turn the Low RinseAid indicator back on.
Cycle Status
The indicator light on the door front will change color to indicate the wush status. Duringthe
wash cycle,the indicator light will be amber.When the wash cycleis complete, the light will
changeto green.
Sounds
The dishwasherwill emit a soundto indicate cycle completion, button presses,and door
ajar.To mute all sounds,pressthe Dry Options button 7 times within 5 seconds.Repeatthis
processto turn sounds back on.
Door Wake
Up Mode
To turn this option ON/OFF, press and hold the START and WASH TEMP buttons for
5 seconds. In the OFF mode, the control
display, control sounds, and interior
lights
(on some models) will not respond to the door opening/closing.
This mode can be
used when observing
certain religious holidays such as the Sabbath. To activate
the control and interior
lights, press any button.