Replacing Of The Illuminant; Trouble Shooting - Nevir NVR-4496 CTNFS Manual De Instrucciones

Freezer:
The freezer is defrosted automatically.
Freezer (optional procedure if encrusted ice should have occurred):
11.
WARNING!Switch off the appliance by turning the thermostat
to position 0/AUS/OFF and disconnect it from the mains.
12. Remove the contents from the freezing-compartment and put them into a
cooling box.
13. Place a container in front of the appliance to catch the water.
14. When the encrusted ice melts put some dry cloths into the freezer-
compartment to hold the water back.
15. Remove the big pieces of ice first.
16. Afterwards remove the small pieces of ice.
17. Wipe and dry the appliance and door seals with dry and soft cloths.
18. After cleaning leave the door open for some time to ventilate the
appliance.

5.2 Replacing of the illuminant

The appliance is equipped with an LED-illuminant. To replace the illuminant,
please contact the aftersales service or a qualified professional. Illuminants
and the replacing of illuminants are not included in guarantee.

6. Trouble shooting

WARNING!Before you start troubleshooting, disconnect the
appliance from the mains. Any work not described in this instruction
manual must be carried out by a qualified professional only.
POSSIBLE CAUSE
The appliance does not work at all.
 The plug of the appliance is not
connected to the socket.
MALFUNCTION
 Check the corresponding socket
by connecting it with another
MEASURE