Type Designation; Product Identification; Technical Specifications - Holmatro CC 23 Manual De Instrucciones

• Make sure that the equipment cannot roll away or tip over. The control and drive must be switched
off and safeguarded against unexpected activation.
• Make sure that moving parts do not move unexpectedly.
• Used or leaked fluids, and any other products consumed during the activities, must be collected and
disposed of in a environmentally responsible way.
3 Description
3.1 Equipment
The crusher is a tool for demolition work. The tool is used to create cracks in stone or concrete walls so
as to remove certain sections. It can also be used to separate sections and cut it into manageable parts,
or in order to weaken the construction. The crusher is produced as a hand tool that can be operated by
one person.
Hoses connect the tool to a pump. On the front of the tool there are two arms that make a pinching
movement. The high hydraulic pressure that is used means these tools can apply enormous forces.
3.2

Type designation

Example: CC 23
/i
Digit Example
1-2 CC
3-4 23
3.3

Product identification

Refer to Fig. 2.
/i
1 Attachment
2 Pinching arm
3 Attachment lock
4 Swing bolt
5 Hinge pin
6 Protection hood
3.4

Technical specifications

/i
Description
max. working pressure
crushing force
max. crushing opening
hydraulic oil type
battery type for light
required oil content (effective) cc
CC 23
Description
Concrete crusher
Type number
Unit
(bar/Mpa)
psi
kN / t
lbf
mm
in
-
-
oz
916.001.550_003
7 Carrying handle
8 Deadman's handle
9 Core coupler (male)
10 Light
11 Light switch
12 Battery
CC 23
720 / 72
10443
113 / 11.5
25403
230
9.1
ISO-L HV VG 15/22
1,5v AA
148
5
EN
27