Silvercrest HG04127A-US Instrucciones De Utilización Y De Seguridad página 18

˜ Charging mobile devices with the power
bank
You can charge up to three devices at the same time using the
power bank . If all outputs are used at the same time, the
8
sum of the output current must not exceed 3 A.
Connect the USB cable
of the device to be charged to the USB output
connect Micro-USB port of the USB Cable
USB input of device to be charged. The charging process
will start automatically.
If your mobile device has a USB type C input, you can use a
type C to type C connection cable (not included) to connect
your device's type C input to this power bank's USB Type C
output . The charging process will start automatically.
3
At the same time, you can place the device to be charged
on the Qi charging surface
In case if the charging process does not begin immediately,
press the ON / OFF button
process. The current battery status of the power bank
displayed during the charging process by the battery status
indicator 6
To end the charging process, disconnect the USB charging
cable from the mobile device and the power bank
power bank will switch OFF and battery status indicator
will switch off after approx. 30 seconds.
Or simply double click the ON / OFF button
bank will switch off.
8
US-EN 18
or the original charging cable
9
7
5
.
2
9 to the Micro-
.
briefly to begin the charging
5
. Then
is
8
8 . The
6
. The power