Silvercrest HG04127A-US Instrucciones De Utilización Y De Seguridad página 20

The power bank
It may be that the power bank is not connected properly.
Check that it is connected.
In order to charge the power bank, a power supply with 5 V
and at least 3 A has to be used.
A connected device is not being charged.
The battery is drained.
Charge the battery.
The device is not connected.
The device is not connected. Check that it is connected.
Briefly press the ON / OFF button
process.
The current consumption of the connected device might be
too low.
Check with your connected device manual and see if your
connected device current consumption comply with this
product. The minimal output current of the power bank is
approx. 50 mA.
The power bank
button is pressed or when a device is connected,
even though the battery is charged.
The power consumption of the connected devices is too high.
Therefore, the internal overcurrent protection device was
activated.
Reduce the number of devices connected and press the ON
/ OFF button
US-EN 20
is not being charged.
8
does not react when the
8
.
5
to begin the charging
5