1. Unclip and remove wood
grain/painted trim pieces from both
sides of steering wheel. (Figure A)
2. Unclip and remove side panel from
driver's side of dash with door open and
remove (2) 7mm screws. (Figure B)
3. Remove (2) 7mm screws from bottom
edge of panel below steering wheel,
unclip panel and let hang. It is not
necessary to completely remove panel.
(Figure C)
4. Unclip and remove wood grain/painted
trim piece from above glove box.
(Figure D)
Continue onto next page
Dash Disassembly
Chevrolet Malibu 2004-2007
(Figure A)
(Figure B)
(Figure C)
(Figure D)
5