1. Slide the stacked ISO DIN units into the trim plate bracket assembly and secure
the units to the kit using the screws supplied with the head units.
(Figure A and B)
2. Aura, Cobalt, G5, HHR, Sky and Vue only: Cut and remove top mounting tabs
on each side of the radio housing. (Figure C)
(Figure A)
Kit Assembly 95-3302
Stacked ISO DIN radio provision
(Figure B)
13
3. Locate the factory wiring harness in the dash. Metra recommends using the
proper mating adapter from Metra or AXXESS. Re-connect the negative battery
terminal and test the unit for proper operation.
4. Reassemble dash in reverse order
of disassembly.
(Figure C)
Cut the two top holes off