Kit Assembly; Double Din Radio Provision (95-3302) - Metra 95-3302 Instrucciones De Instalación

1. Slide the appropriate bracket into the trim plate
aligning the holes in the trim plate to the clips on
the bracket. (Figure A)
2. Slide the DDIN radio unit into the trim plate bracket
assembly and secure the unit to the kit using the
screws supplied with the head unit. (Figure B)
(Figure A)

Kit Assembly 95-3302

Double DIN radio provision
3. Aura, Cobalt, G5, HHR, Sky and Vue only: Cut and
remove top mounting tabs on each side of the radio
housing. (Figure C)
4. Locate the factory wiring harness in the dash.
Metra recommends using the proper mating
adapter from Metra or AXXESS. Re-connect the
(Figure B)
12
negative battery terminal and test the unit for
proper operation.
5. Reassemble dash in reverse order
of disassembly.
Cut the two top holes off
(Figure C)