Kit Assembly - Metra 99-3014G Instrucciones De Instalación

ISO DIN radio provision
1. Secure the radio brackets to the pocket
using (4) Phillips screws supplied.
(Figure A)
2. Secure the bracket/pocket assembly to
the radio trim panel using (4) Phillips
screws supplied. (Figure B)
3. Slide the radio between the radio
brackets, then secure using screws
supplied with the radio. (Figure C)
4

KIT ASSEMBLY

(Figure A)
(Figure B)
4. Clip the factory climate controls into the
radio trim panel. (Figure D)
5. Locate the factory wiring harness and
antenna connector in the dash. Metra
recommends using the proper mating
adapter from Metra or AXXESS. Complete
all connections to the radio and vehicle,
then test the radio and vehicle for
proper operation.
6. Reassemble the dash in reverse order of
disassembly to complete the installation.
(Figure C)
(Figure D)
|
1.800.221.0932 MetraOnline.com