Kit Assembly - Metra 99-8239B Instrucciones De Instalación

ISO DIN head unit provisions
1. Attach the radio brackets to the
radio trim panel using the supplied
(2) #8 x 3/8" Phillips screws.
(Figure A)
2. Mount the aftermarket radio to the
radio brackets/trim panel assembly
using the screws supplied with the
radio. (Figure B)
3. Mount the pocket into the radio
brackets/trim panel assembly
using the supplied (4) #8 x 3/8"
screws. (Figure B)
4. Locate the factory wiring harness
in the dash. Metra recommends
using the proper mating adapter
from Metra or AXXESS. Test the
unit for proper operation.
5. Mount the radio/bracket/trim panel
assembly into the dash.
6. Reassemble dash in reverse order
of disassembly.

Kit Assembly

(Figure A)
99-8239B
(Figure B)
3