◾
Do not open or mutilate the battery. Released
EN
electrolyte is corrosive and may cause damage to the
eyes or skin. It may be toxic if swallowed.
◾
Exercise care in handling batteries in order not to short
the battery with conducting materials such as rings,
bracelets, and keys. The battery or conductor may
overheat and cause burns.
◾
When servicing, use only identical EGO replacement
parts. Use of any other accessory or attachment may
increase the risk of injury.
◾
Battery tools do not have to be plugged into an
electrical outlet; therefore, they are always in operating
condition. Be aware of possible hazards even when
the tool is not operating. Take care when performing
maintenance or service.
◾
Do not wash with a hose; avoid getting water in motor
and electrical connections.
◾
Always wear substantial footwear and long trousers
while operating the machine.
◾
Always be sure of the footing on slopes and to walk,
never run.
◾
Save these instructions. Refer to them frequently and
use them to instruct others who may use this tool. If
you loan this tool to someone else, also loan these
instructions to them to prevent misuse of the product
and possible injury.
SAVE THESE INSTRUCTIONS
NOTE: SEE YOUR POWER HEAD OPERATOR'S
MANUAL FOR ADDITIONAL SPECIFIC SAFETY RULES.
8
LINE TRIMMER ATTACHMENT — STA1500
SPECIFICATIONS
Cutting Mechanism
Line Diameter
Cutting Width
No-Load Speed
Weight (Without battery pack)
Measured sound power level L
WA
Sound pressure level at operator's
ear L
PA
Guaranteed sound power level L
(measured according to 2000/14/EC)
Front-assist handle
Valuation of
vibration a
h
Rear handle
◾
The above parameters are tested and measured
equipped with power head PH1400E.
◾
The declared vibration total value has been measured
in accordance with a standard test method and may be
used for comparing one tool with another;
◾
The declared vibration total value may also be used in
a preliminary assessment of exposure.
NOTICE:
The vibration emission during actual use of the
power tool can differ from the declared value in which the
tool is used; In order to protect the operator, user should
wear gloves and ear protectors in the actual conditions
of use.
PACKING LIST
PART NAME
Line Trimmer Attachment
Guard
Hex Wrench
Multi-Function Wrench
Operator's Manual
About recommended cutting line, please visit the website
egopowerplus.com or refer to the EGO Product Catalogue.
Bump Head
2.4 mm nylon
twist line
38 cm
5000/6000 min
-1
1.59 kg
94.6 dB(A)
K=1.80 dB(A)
83.2 dB(A)
K= 3 dB(A)
96 dB(A)
WA
1.1 m/s
2
K=1.5 m/s
2
1.4 m/s
2
K=1.5 m/s
2
QUANTITY
1
1
1
1
1