Correct Purpose Of Use; Safety Symbols - hafele DT 600 FH Instrucciones De Montaje

2.2 Correct purpose
of use

2.3 Safety symbols

Other markings
The following markings are used in these instructions to highlight action instructions,
results, lists, references and other elements:
1.>, 2.>, 3.>

•
[push button]
"Display"
The DT 600 FH door terminal with push bar/bar handle is a door opening device for
installation on safety doors as part of an escape route.
Correct purpose of use also includes observing all specifications contained in these
instructions.
Any use beyond or other than the correct purpose of use shall be deemed improper use.
The following stickers are located on one or more components of the access control
system. They relate to the immediate environment of where they are located.
Electric voltage
Only qualified electricians are permitted to work on such marked
components.
Unauthorised persons may not open the such marked cabinet.
Crossed-out dustbin
This image indicates that the respective component must not be
disposed of with residential waste.
Do not touch
Components with this marking could be damaged by touching.
Lead
The circuit board does not contain lead.
Step-by-step action instructions
Results of action steps
Lists without a defined order
Controls (e.g. push buttons, switches),
display elements (e.g. signal lamps)
Screen elements (e.g. buttons, assignment of
function keys)
17