If-Module Stratos Dp - Wilo IF-Module Stratos Instrucciones De Instalación Y Funcionamiento

• Check that the Ext. Off wires are free of interference voltage
• Connect the Ext. Off and SBM wires to external devices

7.3.5 IF-Module Stratos DP

Terminal No. Terminal
1 BUS (joined with 3)
2 BUS (joined with 4)
3 BUS (joined with 1)
4 BUS (joined with 2)
5 DP
6 DP
• Connect the wires as shown in the table
• Connect the wires in the same order for the partner pump
• The BUS lines are connected in the partner pump, on terminals 1 and 2
(make sure polarity is correct)
7.4 Final work (all modules)
• Connect the DP wires to the partner pump (double pump only)
• Check the terminal box seal for any visible damage
• Close the terminal box lid with the screws provided so that the seal is tight all
around
• Carry out commissioning / functional test in accordance with the following main
section
Installation and operating instructions Wilo-IF-Modules Stratos
Wire
White (WH)
Blue (BU)
Red (RD)
Black (BK)
English
35