Boston Acoustics TVee One Speaker Base Manual De Usuario página 7

Coaxial Digital In – BETTER
If your television lacks an optical digital out it may include a coaxial digital output. Use an "RCA"-type cable (not included)
to connect your television's coax digital audio output to TVee One's Coaxial Digital In. Other components connected to the
television, such as a DVD/Blu-ray player or cable/satellite tuner, will automatically play through TVee One.
Television rear panel
DIGITAL AUDIO
COAXIAL OUT
Analog In 1/8" (3.5mm) mini plug analog audio – GOOD
If your television has no digital audio outputs, connect its analog stereo audio output using the supplied 1/8" (3.5mm) stereo
cable; if this output is in the form of dual RCA jacks (typically red for right and white or black for left), use the supplied adapter.
Television rear panel
AUDIO
OUTPUT
RCA to 3.5mm
Adapter
If no other audio output is available, connect the set's headphone jack to the analog input using the supplied cable.
Important Note: Input Sensitivity (Analog Input Only)
The normal setting for this is "0 dB. " In rare cases a television' s analog audio output may be too strong. Should you hear
distorted, harsh, or "buzzy" sound from TVee One via its analog stereo input, adjust the rear panel Input Level switch if you
continue to hear distortion. First slide the switch to the -6dB setting, if sound is still distorted, slide switch to -12dB setting.
If you connect multiple inputs to TVee One, the TVee One will automatically select the one with the highest priority. For example,
if optical and analog ins are both connected with live signal, optical will play through the TVee One. If the optical source
subsequently shuts off, the analog signal will be heard; should the optical source power back up, TVee One automatically
switches back to its optical in.
TVee One rear panel
TVee One rear panel
3.5mm Stereo Cable
7