SILESTONE Integrity Guia De Instalacion página 12

2 Installation Guidelines Integrity by Silestone®
Installation guide of
Silestone built-in sink.
If you don't have the suitable tools or the expertise needed to install this type of installation,
Cosentino do not recommend you to do it. In this case use the previous option.
1. Making the countertop cut-out.
The countertop cut-out should be 3mm. smaller than
the sink's inner size although this will depend on the
technician's criteria since the smaller the flange is, a
lesser amount of finishing will be required.
2. Rebating surface.
A rebate of 23mm. width around the cut-out to allow
5mm of material thickness must be made. This process
will be by CNC application.
12
Cut hole
Sink size
Rebate
23mm
5mm
Cut hole
3. Cleaning parts to be bonded.
The two parts which are to be bonded (worktop and
the sink) should be thoroughly cleaned with solvents
or alcohol before applying the silicone; otherwise the
silicone will not bond correctly and the countertop and
sink will not be sealed properly. Make sure that the
silicone is colour coordinated where possible.
Zona a limpiar
Zona a limpiar