Operating The Headset; Making/Ending Calls Via Telephone With Rhl Function; Answering Calls Via Telephone With Rhl Function; Conference Calling - Jabra GN9300e Manual De Usuario

4. Operating the headset

GN9350e GN9330e GN9330e USB
4.1 Making/ending calls via telephone with RHL/EHS function
1. Ensure telephone mode is selected.
2. Remove headset from base, or press headset's talk button if already wearing it.
–> RHL/EHS function will activate (handset lifts/telephone line connection opens).
3. Dial desired number.
4. Replace headset in base, or press the headset's talk button.
–> RHL/EHS function will deactivate (handset lowers/telephone line connection closes).
GN9350e GN9330e GN9330e USB
4.2 Answering calls via telephone with RHL/EHS function
1. The telephone rings.
2. Remove headset from base, or press the headset's talk button.
–> The call will be connected (handset lifts/telephone line connection opens).
Important: During an incoming call, your headset will automatically change to the required mode,
depending on whether the call is coming via the desk phone (telephone) or via VoIP (USB). After
the call, it will revert to the default mode you selected earlier. The initial factory-set mode is the
telephone mode.
GN9350e GN9330e GN9330e USB

4.3 Conference calling

Conference calling lets several headsets join together for a call. The primary headset (A) + 3
extra headsets (B) can join a conference call initiated by the primary headset. (See illustration.)
Making conference calls
1. Remove primary headset from base; make sure link is established. Indicators on base and
headset are flashing.
2. Place secondary headset in primary headset's base.
–> Primary base's telephone and USB mode indicators, and secondary headset's
link indicator, will light for 2 seconds.
3. Remove secondary headset from primary headset's base.
4. After a 4-pitch tone is heard in the primary headset, press the
silver-colored talk button.
5. When the GN9350e is linked up to more than one headset
in conferencing mode the product is not TT4 compliant.
12
A
2 sec
B B B
Important: Steps 2 to 4 may be repeated twice for 2 more secondary headset participants.
6. Use the primary headset's telephone/VoIP application to dial desired number and initiate
conference call.
At any point during a call in progress, you may add secondary headsets to form a conference call.
A maximum number of 4 headsets (1 master plus up to 3 secondary) may join a conference call.
Ending conference calls for all participants
1. Place primary headset in its base, or press its talk button.
–> The conference call is now terminated for all participants.
Note: If the conference call was made via VoIP, you may need to perform additional steps to end
your call. See your VoIP application's user instructions.
Ending conference calls for a secondary headset only
1. Place secondary headset in its own base, or press its talk button.
–> This participant is now terminated from the conference call.
GN9350e GN9330e GN9330e USB

4.4 Emergency calling via VoIP

Your headset supports quicker emergency calling via VoIP applications (softphone).
If the headset is connected to a PC and the PC is screensaver-locked, you can still use the
headset to dial emergency services.
To call emergency services via VoIP:
1. Put on headset.
2. If the PC is on (even if screensaver-locked), press the base unit's telephone mode button
and USB mode button simultaneously for 5 seconds.
–> The base will automatically dial the emergency services number.
Note: This emergency services feature works only with certain VoIP applications.
Please refer to www.jabra.com for more information.
B
B
A
A
A
13