Publicidad
Idiomas disponibles
Idiomas disponibles
IMPORTANCE NOTICE
• How to operate the light sensor
When press the button of "SPEED/LIGHT" for about 3s, the light sensor will
be turned on and LCD display L:ON. Then:
When light sensor detects weak light, the controller and pump will work
under Night Mode automatically: the wave mode will be set to M1, Flow
rate will be set to Flo:1 , all the button will stop working.
When light sensor detects day light, the Night Mode will stop working and
switch to pre-set.
Day Mode. Then, the button will restart operating.
• How to turn off the light sensor?
Hold button of "SPEED/LIGHT" for about another 3s to turn off the Light
Sensor , LCD will display L:OFF.
Master / Slave Control Wi-Li
When more than one pump was located in a tank or in nearby tank ,you can set one controller
in Master and others in Salve ,then you can only operate on the Master controller ,all others
will follows the same operate.
Wireless controller is defined to allow operation among wave makers.
• Master Control: When LCD display Wi:M. The Controller come to Master Control, the Master
Control will control the controller which set in LI:F. in the series.
• Slave Control: When LCD display Wi:F, the controller come to Slave Control and all his button
stop work, it only follows the controller operation which set in Master LI:M.
• Individual Control: When LCD display Wi:N, the controller come to individual controller, it won't
follows the Master controller and can be adjusted by his button.
Operation Mode
M1. Constant Flow Mode: One or more pumps can be operated at the same time. In constant flow.
Flow rate can be adjusted by "SPEED/LIGHT".
M2. Wave Mode: one or more pump can be operated at the same time, use the button of MODE
and Fre /T/<> to find out the proper Frequency to achieve biggest wave. Press "SPEED/LIGHT" to
adjust the flow rate.
Tips 1: different tank and water volume ,the frequency for biggest wave will be different .so you
will need to try and adjust the frequency to find out the proper frequency value. The wave will come
to biggest when wave length turn to be same as the length of tank.
Tips 2: You should press the "Fre/t/<>" button gradually and watch the wave pattern in a certain
period after each adjustment.
↔
Publicidad
