Declaration Of Conformity - Worx WG300E Manual Del Usuario

PLUG REPLACEMEnT
(UK & IRELAnD OnLy)
If you need to replace the fitted plug then
follow the instructions below.
IMPORTANT
The wires in the mains lead are colored in
accordance with the following code:
Blue – Neutral
Brown – Live
As the colors of the wires in the mains lead of
this appliance may not correspond with the
coloured markings identifying the terminals
in your plug, proceed as follows. The wire
which is coloured blue must be connected to
the terminal which is marked with N. The wire
which is coloured brown must be connected to
the terminal which is marked with L.
wARNING: Never connect live or neutral
wires to the earth terminal of the plug. Only
fit an approved BS1363/A plug and the correct
rated fuse.
NOTE: If a moulded plug is fitted and has to
be removed take great care in disposing of the
plug and severed cable, it must be destroyed
to prevent engaging into a socket.
20 20
Connect
Blue to N
(neutral)
Outer sleeve
firmly clamped
Chain saw
13 Amp fuse approved
to BS1362
Brown L (live)
Cable grip
DECLARATIOn Of
COnfORMITy
We,
POSITEC Germany GmbH
Neuer Höltigbaum 6
22143 Hamburg
Declare that the product,
Description
wORX Chain saw
Type
wG300E wG301E wG302E wG303E
Complies with the following Directives,
EC Machinery Directive 98/37/EC
EC Low Voltage Directive 2006/95/EC
EC Electromagnetic Compatibility Directive
2004/108/EC
Noise Emission in the Environment by
Equipment for Use Outdoors Directive
2000/14/EC amended by 2005/88/EC.
–Conformity assessment procedure as per
Annex v
–Measured Sound Power Level XXdB(A)
–Declared Guaranteed Sound Power Level
XXdB(A)
Standards conform to:
EN 60745-1
EN 60745-2-13
EN ISO 3744
EN 55014-1
EN 55014-2
EN 61000-3-2
EN 61000-3-3
2009/08/01
Jacky Zhou
POSITEC Quality Manager
En