Sound Adjustment; Demo Mode - Dentsply Maillefer ProPex II Instrucciones De Uso

F. Sound Adjustment
®
ProPex II is equipped with a sonic indicator which enables monitoring of the
progression of the file within the canal.
This function, in conjunction with the display of progression, enables working "blind"
while still monitoring the progression of the file.
The volume can be adjusted to one of four levels: mute, low, normal and high, by
successive presses on the
G. Demo Mode
The built-in Demo mode is available to become acquainted with the device and to
demonstrate its operation.
1. Disconnect the measuring cable or the charger from the device if
connected and turn Off the device.
2. To start Demo Mode, press and hold the
second until the second beep sounds and "Demo" indication appears in the
bottom left corner of the display.
3. During Demo cycle device operating sequence is shown on the screen.
Press
4. When Demo cycle is completed, it is repeated automatically until
interrupted by the operator.
5. To exit Demo mode press
beep sounds.
Note: If measurement cable is connected to ProPex
device switches automatically to normal operation mode.
volume key.
button to pause the simulation; press
(On/Off) button for about 2
button and hold it for about 2 sec. until a
®
button again to resume.
II during Demo cycle, the
15 / 112