Connect The Drain Hose - meireles MLR 1491 W Manual Del Usuario

11
In case the drain hose is installed
as shown below:
Unhook it only from the right clip (see arro )
12
Connect the drain hose to the
hook it over the edge of a sink by means of the
"U" bend.
Fit the "U" bend E, if not already installed, at the
end of the drain hose.
Ensure that there are no kinks in the drain hose.
Secure the hose so that it cannot fall do n. After ash
phase, machine ill drain out hot ater.
Small hand basins are not suitable.
To make an extension use a hose of the same type and
secure the connections ith clips.
Max. Overall drain hose length: 2.50 m.

CONNECT THE DRAIN HOSE

or
24