Safe Disable Input; Safe Disable Specifications - YASKAWA CIPR-GA50C Serie Instrucciones De Instalación Y Operación

Model
B001 - B004
2001 - 2006
B006 - B012
2010 - 2021
4001 - 4012
2030 - 2082
4018 - 4060
◆

Safe Disable Input

The TUV mark identifies that the product complies with the safety standards.
This section gives precautions to support the Safe Disable input. Contact Yaskawa for more
information.
The safety function complies with the standards shown in
Table 1.9 Applied Safety Standards and Unified Standards
Safety
Standards
IEC/EN 61508:2010 (SIL3)
Functional
IEC/EN 62061:2005/A2:2015 (SILCL3)
Safety
IEC/EN61800-5-2:2016 (SIL3)
Machine ISO/EN ISO 13849-1:2015 (Cat.3, PL e)
Safety
IEC/EN 61000-6-7:2015
EMC
Note:
SIL = Safety Integrity Level.
■

Safe Disable Specifications

The Safe Disable input provides the stop function that complies with "Safe Torque Off" as
specified by IEC/EN 61800-5-2:2016. The Safe Disable input meets the requirements of EN
ISO 13849-1 and IEC/EN 61508. It also has a safety status monitor to detect safety circuit
errors.
When you install the drive as a component in a system, you must make sure that the system
complies with the applicable safety standards.
Refer to Table 1.10 for safety function specifications.
YASKAWA TOMPC71061753A YASKAWA AC Drive GA500 Installation and Operation Instruction
Table 1.8 Screw Sizes and Tightening Torques
Screw Size
M3 × 16
M3 × 20
M4 × 20
Figure 1.8 TUV Mark
WWW.NNC.IR
Table 1.9.
Unified Standards
1 English
Tightening Torque
N∙m (in∙lb)
0.5 - 0.6
(4.4 - 5.3)
0.5 - 0.6
(4.4 - 5.3)
1.2 - 1.5
(10.6 - 13.3)
33