Turning The Screen Saver On And Off; Using Dvd Last Memory; Setting Up Dvd Speaker Output; Setting Up Dvd Dolby Digital - Dynex DX-LTDVD20 Guia Del Usuario

Combo tv con pantalla lcd/reproductor de dvd de 20"
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

20

Turning the screen saver on and off

To turn the screen saver on and off:
1 While your TV combo is in DVD mode, press SETUP. The General
Setup
icon is highlighted.
2 Press PLAY. The General Setup Page opens.
3 Press
or
to highlight Screen Saver, then press PLAY.
4 Press
or
to highlight On or Off, then press PLAY.
5 Press one or more times to go back to the previous menu.
6 To close the menu, press to highlight the Exit icon, then press
PLAY.

Using DVD last memory

Your TV combo can remember where a DVD stopped playing when your
TV combo is turned off. When your DVD combo is turned on and you start
DVD playback, playback resumes at the point where it stopped.
To use last memory:
1 While your TV combo is in DVD mode, press SETUP. The General
Setup
icon is highlighted.
2 Press PLAY. The General Setup Page opens.
3 Press
or
to highlight Last Memory, then press PLAY.
4 Press
or
to highlight On or Off, then press PLAY.
5 Press one or more times to go back to the previous menu.
6 To close the menu, press to highlight the Exit icon, then press
PLAY.

Setting up DVD speaker output

To set up speaker output:
1 While your TV combo is in DVD mode, press SETUP.
2 Press or to select the Audio
Audio Setup Page opens.
-- Audio Setup Page --
Speaker Setup
Dolby Digital Setup
Channel Equalizer
3D Processing
Go To Speaker Setup Page
3 Press
or
to highlight Speaker Setup, then press PLAY.
The Speaker Setup Page opens.
-- Speaker Setup Page --
Downmix
Audio Setup
4 Press
or
to highlight Downmix, then press PLAY.
5 Press
or
to highlight Lt/Rt or Stereo, then press PLAY.
• Lt/Rt–On a disc recorded with a multichannel soundtrack,
the output signal will be incorporated into the left and right
channel.
• STEREO–On a disc recorded with a multichannel soundtrack,
the output signal will be incorporated into stereo.
icon, then press PLAY. The
STR
Lt/Rt
Stereo
6 Press one or more times to go back to the previous menu.
7 To close the menu, press to highlight the Exit icon, then press
PLAY.

Setting up DVD Dolby Digital

To set up Dolby Digital:
1 While your TV combo is in DVD mode, press SETUP.
2 Press or to select the Audio
Audio Setup Page opens.
-- Audio Setup Page --
Speaker Setup
Dolby Digital Setup
Channel Equalizer
3D Processing
Go To Speaker Setup Page
3 Highlight Dolby Digital Setup, then press PLAY. The Dolby
Digital Setup Page opens.
-- Dolby Digital Setup --
Dual Mono
D.R.C
Audio Setup
4 Press
or
to highlight DUAL MONO or D.R.C, then press
PLAY.
• DUAL MONO–This is the output mode for the left and right
signals of the selected audio output. If it is set to MIXED
MONO, the function only works when the DVD uses
5.1-channel sound.
• D.R.C–Select to adjust the linear compression rate to obtain
different compression results for the signals.
5 Press
or
to change the setting, then press PLAY.
6 Press one or more times to go back to the previous menu.
7 To close the menu, press to highlight the Exit icon, then press
PLAY.
Using the DVD player
icon, then press PLAY. The
STR
Stereo
Left Mono
Right Mono
Mixed Mono

Publicidad

Tabla de contenido
loading

Tabla de contenido