Using The Remote Control; Setting Up Your Tv Combo; Connecting An Antenna Or Cable Or Satellite Tv - Dynex DX-LTDVD20 Guia Del Usuario

Setting up your TV combo

Using the remote control

To use the remote control:
• Point the remote control directly at your TV combo, within a 30°
angle of the remote control sensor on the front of your TV combo
and within 20 feet of your TV combo.
Caution
Do not expose the remote control to liquids, direct
sunlight, or shock.
Note
• Objects between the remote control and the
remote control sensor may block the remote
control signal.
• The range of the remote control may be
diminished if direct sunlight or strong lighting is
shining on the remote control sensor. In this
case, change the angle of the lighting, move
your TV combo, or opeate the remote control
closer to the remote control sensor.
Setting up your TV combo
Connecting an antenna or cable or satellite
TV
1
C R / P R Y
COAXIAL C B / P B
INPUT
3
To connect an external antenna, cable TV, or satellite TV:
1 Remove the port cover on the back of your TV combo (1).
2 Plug the antenna cable from an antenna, cable TV, or satellite
receiver (3) to the ANT. IN jack on your TV combo (2).
3 Turn on your TV combo.
4 Press INPUT and the
AUDIO AUDIO VIDEO AUDIO
A N T. I N
L L L
R R R
OUTPUT S-VIDEO INPUT 1
2
or to select TV.
7