Publicidad
• Afterusing
the pressure washer, you should flush
clear water° To do so, simply place chemical injector
the pump, chemical injector and chemical line with
hose in water and siphon for 1 to 2 minutes.
CUSTC)MER _BlUTIES
TABLE
MAi_
TASK
PRESSURE W ASHER
Checlddean inletscreer_
Check p ssure h ose.
Checksoapandchernic_hoseand filter
Check gun and wand for le_s.
PurgepLrnp of ar andcor_arrinants
Every25
Beforeeachuse hoLrscr yeady
x
X
x
x
X
Every 50
lhours oryearly
ENGINE
Chag_ engine o il
x
Se_ice air deener
x
aearVreplace spark plug
x
Every 100
hoursor yeady
Product
Specifications
Pressure Washer Specifications
Pressure
Flow Rate
Cleaning Units (psi x GPM)
2350
2.2 GPM
5170
Engine Specifications
RPM
3600
Rated Horsepower
6.0
Spark Plug Gap
".030" (0.76mm)
Gasoline Capacity
1.5 quarts
Oil (22 oz. capacity)
SAE 30 weight
General
Recommendations
I
The warranty of the high pressure washer does not
cover items that have been subjected to operator
abuse or negligence. To receive full value from the
warranty, operator must maintain high pressure
washer as instructed in this manual.
Some adjustments
will need to be made period-
ocally to maintain your high pressure washer.
All adjustments in the Maintenance section of this
manual should be made at least once each season.
Once a year you should clean or replace the spark
plug, and clean or replace the air filter, and check
the gun and wand assembly for wear. A clean spark
plug and clean air filter assure proper fuel-air mixture
and help your engine run better and last longer.
Your pressure washer pump is a sealed pump, you
should never have to add or change the oil.
NOTE: Over time the o-rings in the gun assembly
become worn. Attached to your owners manual is a
replacememt o-ring and split backup o-ring.
11
Publicidad
