Rug Doctor PDC-1 Manual Del Usuario página 5

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

How to Use:
Filling The clean water tank
1
Locate the Clean
Water Tank
The Clean Water Tank is
the tank located on the
back of the machine.
3
Fill the Clean Water Tank
Unscrew the Easy Measure
Solution Pour Cap from the
Clean Water Tank.
Fill the Clean Water Tank with
HOT tap water until it reaches
the fill line.
4
Adding Rug Doctor Cleaning Solution
Follow the directions on the back
Pour Cap
of the Rug Doctor cleaning solution
and fill the Easy Measure Solution
Pour Cap with the recommended
ounces of solution.
Clean water tank holds 1.5 gallons
of water.
Tightly screw the Easy Measure
Solution Pour Cap onto the tank.
8
PART #71498
R U G D O C T O R P R O D E E P C A R P E T C L E A N E R
FILE NAME
RUGDOC_12336-1_MANUAL UPDATE
>>
CLIENT
RUGDOC
>>
JOB NUMBER
12336
>>
MANUAL
ELEMENT
>>
ACCOUNT
>>
KP
PRODUCTION ARTIST
>>
LOOMIS is releasing this file as requested for release noted below. We are relinquishing all responsibility for the completion of the project and the Agency will be held harmless for any
error, oversights, omissions or other issues that may subsequently arise during the course of completion for this project.
2
Access the Clean Water Tank
Push the Clean Water
Tank Release Button
and pull the tank in
an outward motion
to release tank.
REMEMBER
Fill Line
Always use RUG DOCTOR
deep cleaning solutions.
Other cleaning solutions may harm
the machine and void the machine
and carpet warranties.
5
Now You're Ready to Clean
Securely place
the full Clean
Water Tank
back onto the
machine. You
will hear a click
sound when the
tank has locked
into place.
|
U s e r M a n u a l
BLEED
.9" X 11.5"
>>
TRIM
8.5" X 11"
>>
N/A"
LIVE
>>
4/4
COLOR
>>
1" = 1"
SCALE
>>
How to Use:
Cleaning your carpet
IMPORTANT CLEANING TIP:
Vacuum area with a dry vacuum cleaner thoroughly before deep cleaning
1
Plug in the Machine
Insert plug into a properly
grounded outlet.
CAUTION
Before plugging
machine in check
the Power Button
to make sure it
is in the "off"
position.
3
4
Turn on the Machine
Cleaning Your Carpets
Press the red Power Button
Press the Soap & Scrub Solution
located on the Main Handle
Button to apply solution while
to Carpet position.
making 2 slow wet passes (1
forward and 1 backward) over
each area.
Release the Soap & Scrub Button.
Make 2 slow dry passes (1 forward
and 1 backward) to suck up the
dirty solution (Do not hold down
the Soap & Scrub Solution Button
for this step).
r u g d o c t o r . c o m
|
1 - 8 0 0 - 7 8 4 - 3 6 2 8
2
Position the Machine
Firmly pull
back the Main
Handle to
release the
handle into
the cleaning
position.
9

Publicidad

Tabla de contenido
loading

Productos relacionados para Rug Doctor PDC-1

Este manual también es adecuado para:

Pdc-1r

Tabla de contenido