Sylvania LD370SC8S El Manual Del Propietario página 43

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Symptom
The entered channel number
changes automatically
Remote control does not work
T
Misspelled captions are displayed.
V
Captions are not entirely displayed,
or captions are delayed behind the
dialogue.
Captions are displayed as a white
box.
No caption is displayed in the
Closed Caption-supported
program.
No caption is displayed when playing
the cassette tape containing captions.
Black box is displayed in the TV screen.
Completely distorted picture or
black/white picture with DVD
Picture freezes momentarily during
playback.
Disc cannot be played back.
D
V
Buttons do not work or the unit
stops responding.
D
The unit does not respond to some
operating commands during playback.
Angle does not switch.
Playback does not start when the
title is selected.
The password for rating level has
been forgotten.
Note:
The LCD panel is manufactured to provide many years of useful life. Occasionally a few non active pixels may appear as a fixed point of
blue, green or red. This is not to be considered a defect in the LCD screen.
Some functions are not available in specific modes, but this is not a malfunction. Read the description in this Owner's Manual for more
details on correct operations.
Playback from a desired track and random playback are not available during program playback.
Some functions are prohibited on some discs.
Remedy
Many digital channels have alternate channel numbers. TV changes the
numbers automatically to the ones signifying the broadcasting stations. These
are the numbers used for analog broadcasts.
Check the antenna or cable connection to the main unit.
Check the batteries of the remote control.
Check if there is an obstacle between the sensor and the remote control.
Test the signal output. If OK, then possible remote sensor trouble.
(Refer to "IR Signal Check" on page 44.)
Aim the remote control directly at the sensor on the front of the unit.
Reduce the distance to the unit.
Re-insert the batteries with their polarities (+/– signs) as indicated.
When there is an infrared-equipped device such as PC near this unit, it may
interrupt the remote control signal of this unit.
Move the infrared-equipped device away from this unit, change the angle of
the infrared sensor or turn off the infrared communication function.
Problems with Closed Caption Feature
Closed captioning production companies may broadcast programs without
correcting the misspelling in a live broadcast.
Captions that are delayed a few seconds behind the actual dialogue are
common for live broadcasts. Most captioning production companies can
display a dialogue to a maximum of 220 words per minute. If a dialogue
exceeds that rate, selective editing is used to insure that the captions remain
up-to-date with the current TV screen dialogue.
Interference from buildings or weather conditions may cause captioning to be
incomplete.
Broadcasting station may shorten the program to insert advertisement.
The closed caption decoder cannot read the information of the shortened
program.
The cassette tape may be illegally copied, or the caption signal might not have
been read during copying.
The text mode is selected for caption. Select "CC1", "CC2", "CC3", "CC4" or "Off".
Make sure the disc is compatible with the unit.
Check the disc for finger prints/scratches and clean with a soft cloth wiping
from center to edge.
Clean the disc.
Ensure the disc is correctly inserted.
Check if the disc is defective by trying another disc.
Cancel the parental lock or change the control level.
Insert a correct disc that plays back on this unit.
Handle a disc with special care so that it does not have fingerprints, scratches,
or dusts on its surface.
To completely reset the unit, unplug the power cord from the power outlet for
5-10 seconds.
Operations may not be permitted by the disc. Refer to the instructions of the
disc.
The angle cannot be switched for DVD which do not contain multiple angles.
In some cases multiple angles are only recorded for specific scenes.
Check the parental setting.
Enter the default password "4737", then your forgotten password will be
cleared.
43
EN

Publicidad

Capítulos

Tabla de contenido

Solución de problemas

loading

Tabla de contenido