About This Documentation; Technical Information - AL-KO AK 300 Manual De Instrucciones

Original instructions for use
ORIGINAL INSTRUCTIONS FOR USE
Contents

About this documentation.................................. 9

Technical information......................................... 9

Installation.......................................................... 9
Instructions for use...........................................11
Maintenance..................................................... 11
Guarantee / Warranty for defects.....................12
ABOUT THIS DOCUMENTATION
Read this documentation before starting up
the machine. This is a precondition for safe
working and flawless operation.
Observe the safety warnings in this docu-
mentation and on the product.
This documentation is a permanent integral
part of the product described and must be
passed on to the new owner if the product is
sold.
Explanation of symbols
CAUTION!
Following these safety warnings care-
fully can prevent personal injury and/or
material damage.
Special instructions for greater ease of
understanding and improved handling.
TECHNICAL INFORMATION
General
"AL-KO SAFETY PREMIUM" is effective against
the following unauthorised operations:
a) Decoupling from the towing vehicle
b) Coupling to a different towing vehicle
c) Removal of the trailer hitch ball coupling from
the trailer
695041_a
Utilisation
Trailer hitch ball coupling
Type
AK 160
AK 160
AK 300
AKS 1300
AKS 2004/3004
Additional security "AL-KO safety ball"
To prevent unauthorised towing of the trailer, e.g.
by inserting a hook into the trailer hitch ball cou-
pling, we recommend using the "AL-KO safety
ball" (6) .
Couple this to the ball hitch coupling on the un-
attached trailer before installation of "AL-KO SA-
FETY PREMIUM".
The "AL-KO safety ball" is available in the access-
ories trade. Order no.: 605305
INSTALLATION
Preparation before installation
AK 160 / AK 300 / AKS 1300
Check the bellows
General:
When using the anti-theft device, do not
attach the bellows over the fixing screws
of the trailer hitch ball coupling.
a) Other than an AL-KO overrun hitch:
Check the bellows!
If the bellows goes over the trailer hitch
ball coupling, then check with the manu-
facturer regarding possibly shortening or
replacing it.
Connection - Ø
35
50
50
50
50
9