Turning On Your Monitor; Default Settings - Angelcare AC117 El Manual Del Propietario

STEP 4 - TURNING ON YOUR MONITOR
YOU ARE NOW READY TO USE YOUR MONITOR
The Angelcare monitor can be used with the pre-program factory settings or you can also
®
customize your settings to your preference.

DEFAULT SETTINGS

Detection Mode:
Movement:
Sound:
Sound transmission (VOX):
Tic Function:
VOX Sensitivity:
Temperature Unit:
Temperature Alarm:
Temperature Alarm Setting:
TURN ON YOUR MONITOR
Press ON/OFF
on the Parent
Unit
When Parent Unit is turned ON and Nursery Unit is OFF or if there
is a lost connection between the 2 units (refer to troubleshooting).
The Out-of-range icon will blink on the screen and the Parent Unit
will beep.
1) Press the Parent Unit ON/OFF
2) Press the Nursery Unit Power
NOTE:
The screen of the Parent Unit will
flashes the out-of-range icon until it
displays the room temperature and
function icons. The connecting process
should be done within 30 seconds. If
this sequence is not completed within
Press ON/OFF 30 seconds you will need to switch the
on the Nursery
units off and start again.
Unit
ON
ON
OFF
OFF
Level 2 (of 4)
Fahrenheit - USA
Celsius - Canada
OFF
High: 86˚F / 30˚C
Low: 66˚F / 19˚C
button for 2 seconds.
ON/OFF button for 2 seconds.
E
N
11