SET-UP & OPERATION
Selecting Your Interface Language
The user-interface language can be changed between English and Spanish at any
time. Press MENU, locate the LAST item (SELECT LANGUAGE), then use the up
and down navigation buttons to select the language of choice. Press ENTER to
activate the new selection. The language change occurs after the ENTER button is
pressed.
CONFIGURING THE TOOL FOR YOUR VEHICLE
OBD-II
The tool initially configures for OBD-II vehicles. At any time, the tool can be
reconfigured for OBD-II vehicles by pressing MENU, selecting the SELECT VEHICLE
TYPE option, and selecting OBD-II 1996-CURRENT.
GM, Ford, and Chrysler OBD-I
At any time, press MENU, select the SELECT VEHICLE TYPE option, and select the
appropriate option. Specify the model year of the vehicle, then specify the 8th VIN
digit. Answer any other on screen configuration questions. Configuration is complete
when a screen appears displaying an image of a vehicle cable.
Using the correct cable
Locate the cable that matches the on screen cable image. Refer to Cables &
Descriptions in this manual for specific information.
NOTE: A select few vehicles have diagnostic connector arrangements that are not
supported by the CodeScout tool. These include Chrysler LH-series vehicles, and
some pre-1996 Ford vehicles that have the OBD-II connector under the dashboard.
10
Cable description
On-screen appearance
Chrysler Connector
Works with OBD-I
1983-1995 Chrysler vehicles
with SCI connectors.
Ford Connector
Works with OBD-I
1983-1995 Ford vehicles
with EEC-IV computers.
GM Connector
Works with OBD-I 1982-
1995 vehicles with 12 pin
ALDL connectors.
OBD-II Generic Connector
(yellow)
This standardized cable
is used to scan 1996 and
newer Domestic, Asian, and
European vehicles.
OBD-II Manufacturer
Specific Connector (blue)
For 1994-1995 GM
OBD-I vehicles with a
16 pin connector
CABLES & DESCRIPTIONS
Actual appearance
11