all-clad OM901E50 Guia Del Usuario página 8

F I R S T U S E & C L O C K S E T U P
1. Remove all packaging and stickers from your toaster oven.
2. Remove all accessories and wash them in warm, soapy water. Dry thoroughly.
a. Insert Crumb tray.
3. Plug the cord into a standard 120V outlet.
a. 12:00 default time will start to flash.
b. Use the CONTROL knob to adjust the correct hour then press the CONTROL KNOB to confirm. You can start adjusting the
minute using the same method. Once complete you can press the CONTROL KNOB again to confirm the time or wait for 5
seconds and it will automatically confirm.
NOTE: You can re-set the clock while on standby mode by pressing and holding the CLOCK button for two seconds.
4. To remove any dust or residue remaining from manufacturing, run the Toaster Oven empty on BAKE for 15 minutes at 450F
temperature.
Note: You may observe some smoke escaping from the oven during this time. This is normal and will disappear with use.
8