ASROCK AM2XLI-eSATA2 Manual Del Instrucciones página 31

2.14 2.14 Using SA 2.14 Using SA Using SA Using SAT T T T T A / SA A / SA A / SAT T T T T AII HDDs W A / SA
2.14 2.14 Using SA A / SA
The installation procedures for Windows Vista
If you want to install Windows
your SATA / SATAII HDDs with RAID functions, you need to make a SATA / SATAII
driver diskette before you start the OS installation.
STEP 1: Insert the ASRock Support CD into your optical drive to boot your system.
(Do NOT insert any floppy diskette into the floppy drive at this moment!)
STEP 2: During POST at the beginning of system boot-up, press <F11> key, and
then a window for boot devices selection appears. Please select CD-
ROM as the boot device.
STEP 3: When you see the message on the screen, "Do you want to generate
Serial ATA driver diskette [YN]?", press <Y>.
STEP 4: Then you will see these messages,
Please insert a diskette into the floppy drive.
WARNING! Formatting the floppy diskette will
lose ALL data in it!
Start to format and copy files [YN]?
Please insert a floppy diskette into the floppy drive, and press <Y>.
STEP 5: The system will start to format the floppy diskette and copy SATA /
SATAII drivers into the floppy diskette.
Once you have the SATA / SATAII driver diskette ready, you may start to install
®
Windows 2000 / Windows
setting the RAID configuration on your system, or you may start to use "RAID Instal-
lation Guide" to set RAID 0 / RAID 1 / RAID 0+1 / JBOD / RAID 5 configuration before
you install the OS. Before you start to configure the RAID function, you need to check
the installation guide in the Support CD for proper configuration. Please find the document,
"Guide to SATA Hard Disks Installation and RAID Configuration", at the following path in
the Support CD:
.. \ Information \ Manual \ RAID Installation Guide \ English.pdf
After making a SATA / SATAII driver diskette, you can start to install Windows
®
/ Windows XP / Windows
Windows ® setup, press F6 to install a third-party SCSI or RAID driver. When prompted,
insert a floppy disk containing the ULi
driver will be presented. Select the driver to install according to the mode you choose
and the OS you install.
ASRock AM2XLI-eSATA2 Motherboard
AII HDDs With RAID F AII HDDs W AII HDDs W ith RAID F ith RAID F ith RAID Functions
AII HDDs W ith RAID F
® ®
2000, Windows XP or Windows
® ®
XP / Windows XP 64-bit on your system directly without
®
XP 64-bit OS on your system. At the beginning of
® RAID driver. After reading the floppy disk, the
unctions unctions unctions
unctions
TM are subject to change.
®
XP 64-bit OS on
®
2000
3 1 3 1 3 1
3 1 3 1