Important; Ninja Ultima ® Dual Assembly And Use For The 72 Oz. Pitcher - Ninja BL830 Guia Del Usuario

Assembly and Use of the Pitcher
WARNING: Handle the Top Stacked Blade Assembly with care, as the blades are sharp.
WARNING: Remove utensils prior to processing. Failure to remove may cause the pitcher
to be damaged or to shatter, which may cause personal injury.
WARNING: Never leave the appliance unattended while in use.
CAUTION: Do not blend hot liquids, doing so may cause excessive pressure buildup,
resulting in risk of the user being burned.
IMPORTANT: Make sure that the motor base is plugged in for use.
Assembly
Fig. 1 Fig. 2
1 Review warning and caution statements above
before proceeding to number 2.
2 Place the motor base on a clean, dry, level surface
such as a counter or table top.
3 Align and lower the pitcher onto the motor base.
(Fig. 1) Handle should be aligned slightly to the
right of the "LOCK" symbol on the motor base.
4 Rotate the pitcher clockwise until it locks in place.
(Fig. 2) You will hear a click when the lock is
engaged.
NOTE: The pitcher can be placed on the motor base
two ways; the handle can be on the front right
corner or the front left corner. (Fig. 3a, Fig. 3b)
5 Holding the Top Stacked Blade Assembly by the top
of the shaft, place it onto the bottom blades inside
the pitcher. Ensure that the Top Stacked Blade
Assembly is seated properly by standing the blade
assembly upright in the pitcher. Do not operate
the unit if the Top Stacked Blade Assembly is not
upright at any time. (Fig. 4)
NOTE: The Top Stacked Blade Assembly will fit
loosely on the bottom blades but will be secured
once the lid is in place.
Fig. 3a
OR
Fig. 3b
TIP: When pureeing, use only the bottom blades for
best results.
NOTE: The bottom blades are not removable.
6 Add the ingredients to the pitcher, making sure
that they do not exceed the 72 ounce mark on the
pitcher.
NOTE: If you need to add additional ingredients
while the appliance is processing, turn the
appliance off, open the pour spout cap and pour the
ingredients in through the opening.
NOTE: When blending any kind of liquids, such as
mixtures of any drinks or smoothies, do not exceed
the "MAX" liquid mark (64 ounces) on the pitcher.
7 Plug the power cord into the electrical outlet and
press the power button ( ).
8 Holding the lid by the handle in the upright position,
place it on top of the pitcher aligning the arrow
( ) located on the lid with the arrow ( ) located on
the pitcher's handle. (Fig. 5) Press the handle down
until you hear a click.
Fig. 4 Fig. 5
ninjakitchen.com
12