Wallpaper Remover (Optional); Transport; Storage; Care And Maintenance - Kärcher SG 4/4 Manual De Instrucciones

Using the floor cleaning cloth
Flip and replace floor cloth regularly to im-
prove the dirt pickup.
 Attach the floor cloth to the floor nozzle.
1 Fold the floor cloth the long way and
place the floor nozzle on top of it.
2 Open holding clamps.
3 Place the cloth ends into the openings.
4 Close the holding clamps.
CAUTION
Do not insert fingers between the clamps.
Hand nozzle
Suited for small washable areas, shower
stalls, mirrors or furniture cloth material.
 Pull the terry cloth cover over the man-
ual nozzle.
Window nozzle (option)
Order no. 4.130-115.0
 Apply steam to the glass surface from a
distance of approximately 7.9 in
(20 cm) until the surface is moistened
evenly.
 Switch off the steam supply.
 Strip the glass surface in straight lines
from the top to the bottom using the rub-
ber lip.
 Wipe the rubber lip and the bottom
edge of the window dry after each strip.

Wallpaper remover (optional)

Order no. 2.863-076.0
You can use the wallpaper remover with
the steam cleaner to remove wallpapers.
 Apply wallpaper remover to the edge of
a wallpaper length and let the steam
settle in until the wallpaper is fully mois-
tened (approx. 10 seconds).
 Reset wallpaper remover without
switching off. Lift the soaked piece of
wallpaper using a flat trowel, and pull it
off the wall.
In case of woodchip wallpaper that has
been painted several times, the steam may
not be able to soak the wallpaper. If this
happens, you need to prepare accordingly
with a nail roller.
12
CAUTION
Risk of injury and damage! Observe the
weight of the appliance when you transport
it.
 For transport over short distances:
Switch off the heating, bring the device
into an upright position, grab the device
on the carrying handle and extension
tube to carry it.
 When transporting in vehicles, secure
the appliance according to the guide-
lines from slipping and tipping over.
CAUTION
Risk of injury and damage! Note the weight
of the appliance in case of storage.
This appliance must only be stored in inte-
rior rooms.

Care and maintenance

DANGER
Always disconnect the mains plug and al-
low the steam cleaner to cool down before
performing any maintenance work.

Rinsing the boiler

Illustration
Rinse the boiler of the steam cleaner boiler
at the latest after 5 boiler fillings.
 Fill the boiler with water and shake it
strongly. This dissolves lime scaling re-
siding on the boiler bottom.
 Empty water out.
Descaling the boiler
As limescale also builds up on the boiler
walls, we recommend to descale the boiler
using KÄRCHER Bio descaler RM 511.
The KÄRCHER Bio descaler RM 511 is a
product based on citric acid, which is com-
pletely biodegradeable.
ATTENTION
Only use products approved by KÄRCHER
to exclude any damages of the appliance.
 Disconnect the mains plug from the
socket.
– 6
EN

Transport

Storage