Removing The Accessories; Storing The Appliance; How To Use The Accessories; Floor Nozzle - Kärcher SG 4/4 Manual De Instrucciones

Removing the Accessories

DANGER
Scalding danger! Hot water may drip out of
the accessory parts while you are detach-
ing them! Never disconnect accessory
parts while steam is escaping.
Turning Off the Appliance
 Switch the appliance off at the switches.
 Fold down the cover of the socket in the
device and pull the steam connector out
of the device.
 Disconnect the mains plug from the
socket.
Note: You can leave the residual water in
the appliance.

Storing the Appliance

 Place the manual nozzle, detail nozzles
and small parts into the accessories
storage box.
 Coil the power cord around the cable
hooks while the device is standing.
 Insert the extension pipes individually
into the recesses on the appliance floor.
Note: Always allow the brushes to cool
down so that any deformation of the bristles
is avoided.

How to use the accessories

Note: Detergent residue or care emulsions
that are still present on the surface to be
cleaned can lead to streaks during steam
cleaning. However, these will disappear
with repeated cleaning procedures.
Steam gun
Application examples for use of the steam
gun without accessories:
– Elimination of odours and wrinkles from
hanging pieces of clothing, by steaming
them from a distance of 3.9-7.9 in (10-
20 cm).
– Removing dust from plants. Here, keep
a distance of 7.9-15.7 in (20-40 cm).
– Moist dusting, by briefly steaming the
cloth and wiping the furniture with it.
– The closer you hold the nozzle to the
dirty spot, the higher the cleaning effect
as temperature and pressure of the
steam reach their maximum values im-
mediately when they are emitted from
the nozzle.
– The detail nozzle with the different at-
tachment is suited for cleaning difficult
to access points, such as corners,
grooves, etc. as well as blinds, central
heaters, toilets, stainless steel, mirrors,
mirrors, fixtures, coated and enameled
surfaces, loosening of stains.
– The power nozzle increases the emis-
sion speed of the steam. Therefore, it is
well-suited for cleaning very tough dirt,
blowing out corners, grooves, etc.
Note: The round brush is not suitable for
cleaning sensitive surfaces.
Floor nozzle with bristles
– For abrasive cleaning of stubborn soil-
ing.
– Suited for all washable wall and floor
coverings, e.g. stone floors, tiles and
PVC floors. Work slowly on very dirty
surfaces to allow the steam to act on the
dirt for a longer period of time.
Floor nozzle with lamellae
– For hygienic cleaning of smooth surfac-
es, because of higher surface tempera-
ture.
– For a hygienical cleaning result steam
directly on the hard surface with a work-
ing speed of max. 11.8 in per second
(30 cm per second). Additionally set
VAPOHYDRO to minimum position and
steam pressure to maximum position.
– 5
EN
Detail nozzle

Floor nozzle

11