Customer Service; Warranty; Accessories And Spare Parts . En - Kärcher HDS 5/13 U Manual De Instrucciones

Ocultar thumbs Ver también para HDS 5/13 U:
Tabla de contenido

Publicidad

Device leaks, water drips from the
bottom of the device
– Pump leaks, safety valve not tight.
Note: 3 drops/minute are allowed.
 With stronger leak, have device
checked by customer service.
Device is not sucking in detergent
– Nozzle is set to "High pressure"
 Set nozzle to "CHEM".
– External detergent container is empty.
 Fill/replace external detergent contain-
er.
– Filter at the detergent suction hose dirty
 Clean filter.
Illustration
– Backflow valve stuck
 Remove the detergent hose and loosen
the backflow valve using a blunt object.
Burner does not start
– Fuel tank empty.
 Refill fuel.
– Water shortage
 Check water supply, check connec-
tions.
– Water flow temperature too hot.
 Fill in water with a max. temperature of
30°C.
Illustration
– Fuel filter dirty
 Change fuel filter.

Customer Service

If malfunction can not be fixed, the de-
vice must be checked by customer ser-
vice.

Warranty

The warranty terms published by our com-
petent sales company are applicable in
each country. We will repair potential fail-
ures of the appliance within the warranty
period free of charge, provided that such
failure is caused by faulty material or de-
fects in fabrication.
12
Accessories and Spare Parts
– Only use accessories and spare parts
which have been approved by the man-
ufacturer. The exclusive use of original
accessories and original spare parts
ensures that the appliance can be oper-
ated safely and trouble free.
– At the end of the operating instructions
you will find a selected list of spare parts
that are often required.
– For additional information about spare
parts, please go to the Service section
at www.kaercher.com.
– 9
EN

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Hds 5/13 ux

Tabla de contenido