GHL MixRite Manual Del Usuario página 6

A MixRite Bypass installation
2.5 (M/h)
including mobile fertilizer solution
tank
Chocking valve
Operating valve
Every stroke of the MixRite moves a predetermined volume of
water with a predetermined volume of liquid additive.
To adjust the volume of the liquid additive in models 569(CW/CL/PVDF),
570(CW/CL/PVDF), 572(CW/CL/PVDF), 571(CW/CL/PVDF),
573(CW/CL/PVDF), 576IN, 578IN, 577IN, 579IN:
1. Remove the upper U–latch from the Proportioning Lock Nut.
2. Preset the amount of additives according to the Percentage to
Water Scale that is found on the proportioner.
Turn the proportioning Adjuster counter clock-wise to increase
the amount of additives.
Turn the Proportioning Adjuster clock-wise to decrease the
amount of additives.
The marking on the scale indicates the % of additive out of
the total water flowing through the injector.
3. Turn the proportioning Adjuster slightly, until the U-latch holes of
the Proportioning Lock Nut align with the notches in the
proportioner.
4. Push the U-latch into the U-latch holes of Proportioning Lock Nut
until it is firmly in place.
I-870
Rev G - 37915
Main Water Pipe
Reservior Tank
Adjusting the MixRite
www.ghlinc.com
Page 6 of 36