Atex Y Iecex - MTS Sensors Level Plus Manual De Funcionamiento

13.5 ATEX y IECEx

13.5.1 Seguridad intrínseca
13.5.1.1 Condiciones específicas para un uso seguro
1. La carcasa del aparato contiene aluminio y se considera que esto
constituye un riesgo potencial de ignición por impacto o fricción.
Se debe tener cuidado durante la instalación y el uso para evitar
B
impactos o fricción. (cuando se instala con aprobación de Ga)
2. La temperatura ambiente máxima permitida del transmisor de
nivel digital/analógico Level Plus
efectos producidos por la temperatura del proceso y otros efectos
térmicos, se debe tener cuidado para garantizar que el ambiente
circundante y el ambiente dentro de la carcasa del transmisor no
supere los 71 °C.
3. Algunos modelos contienen piezas no metálicas en la carcasa. Para
evitar el riesgo de chispas electrostáticas sobre la superficie no
metálica, la superficie se debe limpiar solo con un paño húmedo.
13.5.1.2 Etiquetas
ENTITY PARAMETERS:
SEE PRINT REFERENCE CHART
B
MTS Systems Corporation
Sensors Division
3001 Sheldon Dr.
Cary, NC 27513
Model No:
Serial No:
Date :
NOTES:
1. STANDARD LETTERING UNIVERS 55
A OR ITC GARAMOND BOOK.
B
2. MATERIAL TO BE SCREEN PRINTED ALUMINUM WITH SATIN
BACKGROUND AND BLACK TEXT OR LASER ETCHED ALUMINUM.
∆
3.
4. DIMENSIONS IN BRACKETS [ ] ARE IN INCHES
5. MATERIAL: .8 [.03] THICK ALUMINUM
WARNING: REFER TO INSTALLATION DRAWING FOR CAUTION/WARNINGS
6. REFER TO TABLE 1 FOR "L1" & "L2" DIMENSIONS.
Fig. 50: Etiqueta FMC de seguridad intrínseca, Modbus y DDA, carcasa NEMA
NOTES:
1. STANDARD LETTERING UNIVERS 55
OR ITC GARAMOND BOOK.
A
2. MATERIAL TO BE SCREEN PRINTED ALUMINUM WITH SATIN
BACKGROUND AND BLACK TEXT OR LASER ETCHED ALUMINUM.
∆
3.
4. DIMENSIONS IN BRACKETS [ ] ARE IN INCHES
5. MATERIAL: .8 [.03] THICK ALUMINUM
IP RATING WAS 66
6. REFER TO TABLE 1 FOR "L1" & "L2" DIMENSIONS.
RELEASE TO PRODUCTION
USE MTS LOGO
ARTWORK
10 POINT SIZE
4.5 POINT TEXT SIZE
MTS TO PRINT
MODEL NO.
es de 71 ºC. Para evitar los
®
SERIAL NO.
DATE CODE.
8 POINT TEXT
SIZE
®
Level Plus Transmitter
MTS TO PRINT
MODEL NO.
SERIAL NO./DATE CODE
12.70 [.50]
MTS TO PRINT
FM14ATEX0068X
IECEx FMG 14.0032X
MODEL NO.
II 1/2 G Ex ia IIC T4 Ga/Gb
Ta = -50°C to +71°C ; IP65
SERIAL NO./DATE CODE
when connected in accordance
INDICATES CRITICAL DIMENSIONS.
with FM approved installation
drawing # 651543-3
P/N 551629-3 Rev B
***NO REVISIONS SHALL BE MADE WITHOUT THE NOTIFICA
12.70 [.50]
C
69.85 [2.75]
B
A
R E
PROPRIETARY DATA
INDICATES CRITICAL DIMENSIONS.
THE INFORMATION AND DESIGN(S) DISCLOSED
HEREIN ARE THE PROPERTY OF MTS SYSTEMS
CORPORATION AND MAY NOT BE USED,
REPRODUCED OR DISCLOSED IN ANY FORM
EXCEPT AS GRANTED IN WRITING BY MTS
SYSTEMS CORPORATION. THIS RESTRICTION
C
EXCLUDES INFORMATION THAT IS IN THE
2
2
R3.30 [.13]
Fig. 51: Etiqueta ATEX/IECEx de seguridad intrínseca, Modbus y DDA, carcasa NEMA
2
1.78 [.07]
MTS Systems Corporation
Sensors Division
3001 Sheldon Drive, Cary, N.C. 27513
***NO REVISIONS SHALL BE MADE WITHOUT TH
7847
B
II 1/2 G Ex ia IIC T4 Ga/Gb
Ta = -50°C TO +71°C ; IP65
3.70 [.15]
WARNING: SUBSTITUTION OF COMPONENTS MAY IMPAIR INTRINSIC SAFETY
A REFER TO INSTALLATION DRAWING FOR CAUTION/WARNINGS
7570
Fig. 52: Etiqueta ATEX/IECEx de seguridad intrínseca, Modbus y DDA, carcasa con cavidad
1725
REV
ECO #
individual y doble
PROPRIETARY DATA
MTS Systems Corporation
THE INFORMATION AND DESIGN(S) DISCLOSED
Sensors Division
HEREIN ARE THE PROPERTY OF MTS SYSTEMS
3001 Sheldon Drive, Cary, N.C. 27513
1.78 [.07]
CORPORATION AND MAY NOT BE USED,
REPRODUCED OR DISCLOSED IN ANY FORM
EXCEPT AS GRANTED IN WRITING BY MTS
SYSTEMS CORPORATION. THIS RESTRICTION
II 1/2 G Ex ia IIC T4 Ga/Gb
Ta = -50°C TO +71°C ; IP65
3.70 [.15]
EXCLUDES INFORMATION THAT IS IN THE
8256 WARNING: SUBSTITUTION OF COMPONENTS MAY IMPAIR INTRINSIC SAFETY
REFER TO INSTALLATION DRAWING FOR CAUTION/WARNING.
PUBLIC DOMAIN OR WAS LEGITIMATELY IN THE
7 8 4 7
PRIOR POSSESSION OF THE RECIPIENT.
Fig. 53: Etiqueta ATEX/IECEx de seguridad intrínseca, Modbus y DDA, carcasa con cavidad
7570
individual y doble
2
V E C O #
I 45 I
8256
Level Plus
8 POINT TEXT
Level Plus Transmitter
MTS Systems Corporation
Sensors Division
3001 Sheldon Dr.
Cary, NC 27513
Model No:
Serial No:
Date :
FM14ATEX0068X
IECEx FMG 14.0032X
II 1/2 G Ex ia IIC T4 Ga/Gb
Ta = -50°C to +71°C ; IP65
"L1"
when connected in accordance
with FM approved installation
drawing # 651543-3
∆
"L2"
WARNING: REFER TO INSTALLATION DRAWING FOR CAUTION/WARNINGS
USE MTS LOGO ARTWORK
14.0 POINT SIZE
69.85 [2.75]
7.5 POINT SIZE
28.70 [1.13]
Level Plus Transmitter
FM14ATEX0068X
R
IECEx FMG 14.0032X
"L1"
∆ "L2"
15.80 [.62]
IP RATING WAS 66
USE MTS LOGO ARTWORK
14.0 POINT SIZE
RELEASE TO PRODUCTION
DESCRIPTION 7.5 POINT SIZE
86.30 [3.40]
Level Plus Transmitter
34.69 [1.37]
FM14ATEX0068X
R
IECEx FMG 14.0032X
- THREAD DEPTHS ARE TO MIN. FULL TH
- DRILL DEPTHS ARE TO FULL DIA.
- REMOVE BURRS AND SHARP EDGES
- DO NOT SCALE PRINT
P I
- MACHINED SURFACE FINISH 3.2uM [125
4.0 POINT TEXT SIZE
RELEASE FOR PRODUCTION
(TYP.)
UNLESS OTHERWISE SPECIFIED
TOLERANCES
0 PLACES
MM
0.5
- THREAD DEPTHS ARE TO MIN. FULL THDS
- DRILL DEPTHS ARE TO FULL DIA.
CON COMPARTIMIENTOS
®
Manual de funcionamiento
SIZE
®
1725
1
651544-3
551641-3
P/N 551629-3 Rev B
1725
INSTALL PER DRAWING # 651543-3
SUPPLY VOLTAGE: 28 VDC
P/N 551703-X Rev C
UNLESS OTHERWISE SPECIFIE
4.0 POINT TEXT SIZ
(TYP.)
TOLERANCES
1725
0 PLACES 1 PLACE
NOTES:
MM
MM
1. STANDARD LETTER 0.5 0.1
OR ITC GARAMOND
INSTALL PER DRAWING # 651544-3
SUPPLY VOLTAGE: 28 VDC
2. DIMENSIONS IN BR
ADDED "D1"
P/N 551705-X Rev C
IN INCHES.
R A T N I G W A S 6 6
3. MATERIAL: 3M 7883
POLYESTER FOIL W
D E S C R P I I T O N
INK.
TITLE
1 PLACE
ANGLES
MM
0.1
FIRST
ANGLE
ADDED "D1"
R3
1.78
DASH
-1
1.78
-2
17.53
DAS
-
-
"D
SEE
17.53
ANGLE
"D
SEE
(AC
m
N
N