Step 4 Check The Electrical; And Cautions - Samsung DW80H995 Serie Manual De Instalación

STEP 4 CHECK THE ELECTRICAL REQUIREMENTS AND CAUTIONS
The electrical requirements for the dishwasher are as follows:
* In the United States, install in accordance with the National Electric Code/State and Municipal codes
and/or local codes.
In Canada, install in accordance with the Canadian Electric Code C22.1 -latest edition/Provincial and
Municipal codes and/or local codes.
For cable direct connections.
Use flexible, armored or non-metallic sheathed, copper wire with a grounding wire that meets the
wiring requirements for your local codes and ordinances.
Use the strain relief method provided with the wiring junction box or install a U.h-listed/OSA-certified
clamp connector to the wiring junction box. If using conduit, use a U.h-listed/CSA-certified conduit
connector.
e For power cord connections
The power supply cord must plug into a mating three prong, grounded outlet, located in the cabinet
next to the dishwasher opening. The outlet must meet your local codes and ordinances. Use a U.L.-
listed/CSA-certified power cord kit.
The dishwasher must be connected to an electrical supply that provides the voltage and
amperage marked on the rating plate of the unit: 15 amps, 120 volts, 60Hz AC.
Ensure that the circuit breaker connected to the dishwasher is off.
The power cable must not extend more than 4 ft (1.2 m) from the side of the dishwasher.
Check with a qualified electrician or serviceman if you are unsure whether the dishwasher is
properly connected.
Do not connect another appliance to the same power outlet as the dishwasher.
Before connecting the power cable to the dishwasher, ensure that there are no electrical
hazards (which may result in fire, explosion, electric shock, or personal injury).
The power cable must pass through the channel on the bottom of the dishwasher as shown
in Figure 3.
<Figure 3>
Dishwasher bottom
10 installing the dishwasher
D1,*Tg0H9950US 00151A 06 EN 150216indd Sec3:10