ChargingTheShaver - Panasonic ES‑LV65 Instrucciones De Funcionamiento

Chargingtheshaver

1
1
Inserttheappliancepluginto
theshaver.
• Turn the shaver off before inserting.
2
2
Plugintheadaptorintoa
householdoutlet.
• Check that the charge status lamp (
glows.
• Charging is completed after approx. 1 hour.
The charging time may decrease depending on the
charging capacity.
• Wipe off any water droplets on the appliance socket.
• Check that the outer foil is not deformed or damaged when
you are attaching the shaver.
• If the shape of the plug does not fit the power outlet, use an
attachment plug adaptor of the proper configuration.
While charging
The charge status lamp (
glows.
The number of the battery
capacity lamp will increase as
charging progresses.
10
ES-LV65_US.indb 10
2
1
)
After charging is completed
)
The battery capacity lamp and
the charge status lamp will
light up and then turn off after
5 seconds.
Abnormal charging
The charge status lamp ( ) will blink twice every second.
• After charging is completed, turning the power switch ON with the
shaver plugged in will cause the battery capacity lamp and the
charge status lamp to light up and then turn off after 5 seconds.
This shows that the shaver is fully charged.
• Recommended ambient temperature for charging is 10 – 35 °C
(50 – 95 °F). It may take longer to charge or the battery may fail
to charge properly in extremely high or low temperatures.
Charge the shaver within the recommended ambient temperature
range.
• When charging the shaver for the first time or when it has not
been in use for more than 6 months, the charge status lamp (
may not glow. It will eventually glow if kept connected.
3
3
Disconnecttheadaptorafterchargingis
completed.
• Charging the battery for more than 1 hour will not affect battery
performance.
Note
You cannot operate the shaver while charging.
)
2013/07/19 10:25:56