Detaching And Attaching The Front Panel; Fuse Replacement - Sony CDX-G1170U Manual De Instrucciones

2
Mount the unit onto the bracket , then
attach the protection collar .

Notes
 If the catches are straight or bent outwards, the unit
will not be installed securely and may spring out.
 Make sure the 4 catches on the protection collar 
are properly engaged in the slots of the unit.
Mounting the unit in a Japanese car
You may not be able to install this unit in some
makes of Japanese cars. In such a case, consult your
Sony dealer.
TOYOTA

Bracket
Existing parts supplied with
your car
NISSAN

Bracket
Existing parts supplied with
your car
18
GB



to dashboard/center console
Bracket
to dashboard/center console
Bracket
Note
To prevent malfunction, install only with the supplied
screws .

Detaching and attaching the front panel

For details, see "Detaching the Front Panel"
(page 5).

Fuse replacement

When replacing the fuse, be sure
to use one matching the
amperage rating stated on the
original fuse. If the fuse blows,
check the power connection and
replace the fuse. If the fuse blows
again after replacement, there
may be an internal malfunction. In such a case,
consult your nearest Sony dealer.


Fuse (10 A)