Makita SKR60 Manual De Instrucciones página 4

Specifications
Recommended use
Accuracy
Rotation speed
Scanning length
Batteries
Working time
Weight
Dimensions
Laser diode
Horizontal Setup
1) Put the SKR60 on a flat surface or tripod, or use
the wall mount (see "ceiling grid" or "tripod"
sections).
2) To level the laser, center the bubbles in the
horizontal vials by turning leveling knobs X and Y.
The bubbles move in the direction you turn the
knobs. Level one vial, then the other, then make fine
adjustments to both.
3) Turn the laser on by pressing the on/off key.
Vertical Setup
1) Put the SKR60 in vertical position on a flat
surface or tripod.
2) Level the laser using the adjustable feet (11) and
leveling knob Y to center the bubble in the vertical
vial.
3) Turn the laser on by pressing the on/off key.
30 m (100 ft.) radius
+/- 1 cm at 30 m
(+/- 3/16" at 50 ft.)
0, 150, 400, 600 rpm
2°, 8°, 25°
3 AA alkaline batteries
30 hours
4 lbs. (2 kg)
6 3/4" x 5" x 5"
170 x 120 x 140 mm
Visible 635 nm; <5mW:
Class IIIR/Europe
Class IIIa/US
4